TPDH-2000
The TPDH-2000 Deuterium Tungsten Halogen Light Source combines the continuous spectrum of deuterium and tungsten halogen light sources in a single optical path.
The combined-spectrum light source produces a powerful, stable output from 215-2500 nm. In addition, deep-UV versions of the light source are available, providing a 190-2500 nm wavelength range.
Options and Accessories
Integrated shutters are also available with the TPDH-2000and can be driven either by a switch or by a TTL signal. Another option is to include a filter holder with the system, which accepts filters up to 4 mm in thickness and as large as 25-mm square or 20-mm round in diameter. All versions of the TPDH-2000have an SMA 905 Connector for easy coupling to our spectrometers and accessories via optical fiber, and a safety shutter for blocking the light when the fiber is not attached.
Adjustable Power
All versions of the TPDH-2000 have a potentiometer on the back of the light source to balance the light level between the deuterium and tungsten halogen light sources. This potentiometer allows you to adjust the optical power of the tungsten halogen light from 10-100%.
Optical Fibers
We recommend using our solarization-resistant optical fibers with all versions of the TPDH-2000.
TPDH2000 Spectral Output
This spectral output graph shows the output of the TPDH-2000(red) at full power and the TPDH-2000 with the tungsten halogen at low power (pink), TPDH-2000(blue). The height of the deuterium atomic emission line depends on the optical resolution of the spectrometer.
TPDH-2000 Deuterium Light Source Specifications
Dimensions:
150 mm x 135 mm x 319 mm
Weight:
3.5 kg
Power consumption:
25 W (deuterium); 20 W (tungsten halogen)
Wavelength range:
190-2500 nm (deep-UV deuterium and tungsten halogen bulbs)
215-2500 nm (standard deuterium and tungsten halogen bulbs)
Humidity:
5-95% without condensation at 40 °C
Lamp current:
Operating 85 V/0.3A
Lamp lifetime:
1,000 hours
Lamp voltage:
Ignition 580 V @20°C
Current voltage drift:
<0.01% per hour
Current voltage stability:
<5 x 10-6 peak-to-peak (0.1-10.0 Hz)
Operating temperature:
5 °C - 35 °C
Power requirements:
85-264 V 50/60 Hz
Radiation characteristic:
Aperture 0.5 mm, numerical aperture 26° (13°); focused
Total power: 100 W
Power consumption:
Approximately 78VA
Warm-up time:
40 minutes (deuterium);
20 minutes (tungsten halogen)
Markings:
CE; VDI/VDE 0160; EN 61010
6.Deutrium -Tungsten Halogen Light Source
Xenon Light SourceZolix offers a variety of light sources an...
TLS Wavelength Tunable Monochromatic Light SourceTLS wavelen...
TLSE Enhanced Wavelength Tunable Monochromatic Light SourceT...
Model :LSXS-500 Photocatalysis special light sourceLSXS-500 ...
Tungsten-halogen Light SourceThe size of 50W Tungsten-haloge...
Deutrium-halogen Light Source.......
Mercury Light Sources--LHM254
Mercury Light Sources--LHM254LHM254 Mercury lamp wavelength ...
